Innovative products and product additions
Gage SN4520 / SN4522 / SN4523 / SN4524 / SN4526
- VW-norm 39D 807
- Punching shop large tool making
Dissociation SN4540 / SN4545
- VW-norm 39D 578
- Punching shop large tool making
Locating cone SN43 / Spacer plates SN43-DP
- VW-norm 39V 1168
- Punching shop large tool making
Blank holder cam PMON
- Innovation: Driver in the upper part pulls the cam in end position
- Saving of working stages and time
► PDF-PMON
Centring elements Z55
- For internal centering
- Flexibly position in the tool
- Provides for an improved part quality
Flowmeter Z7703
allows
- control
- regulation
- shutoff
of cooling circuits directly at the tool.
Deflecton element Z7741
Connect cooling channels securely and variably
- Connection over multiple mould plates is possible
- It connects a cooling hole distance of 30 to 500 mm
- Made out of stainless steal, resistant against aggressive cooling media
Gas springs easy manifold system
Manifold plate systems SN2907 increase the process reliability and thus save hard cash.
- Easy maintenance and installation
- Compact design
- Cost-efficient
- Lower machining operation is required
- Production according to the current legal requirements and technical regulations
► PDF-Brochure Gas springs easy manifold system
Manifold plates SN2908
Not only bring your products in form but also your process.
STRACK manifold plates: the most efficient solution for your forming
- Innovative and powerful
- Safe and durable
- Efficiency increasing and still easy controllable
- Versatile
► PDF-Brochure Gas springs easy manifold system
Digital counter Z5265
Digital counter facilitates the observance of maintenance plans and the control of service lives.
► PDF-Z5265
Tempering control filter Z7700
The temperature control filter Z7700 is a special oil- and water filter designed for small cooling holes or core coolings.
Due to its fine filter insert it removes finest dirt particles from the cooling circuit which can otherwise lead to clogged cooling channels (for example in laser-sintered core inserts) or to early wear of sealing elements in core coolings.
► PDF-Z7700
PowerMax® light standard cam
Low-cost cam has supplemented standard cam series
Simple Less components for reduced spare parts requirements.
Efficient Price/performance winner of small series and niche products
(tested and released according to VW standard 39 D 999 for quality class 2).
Compatible Low-cost alternative with identical construction dimensions of the PowerMax® series.
Please read more ► PDF-Press relase 01/17
► PDF-Brochure PowerMax® light - Aerial cam Units ... the efficient units
Security features gas springs
For user security, STRACK NORMA developed security features for all gas springs
The features installed in the springs are safety-relevant protective devices which are venting the gas springs in case of too fast extension of the piston rod (shock relief), in case of overstroke and overpressure and thus providing a protection against injuries to the user, but also prevent a possible tool breakage.
On the gas-spring body is marked by laser which security features are included in the gas springs. In this context, the gas spring catalogues were updated and supplemented with new type series.
In the updated documents you will find more detailed information, please refer to our homepage under
► Spring elements / Gas springs / PDF catalogue Gas springs
Simply remove punching waste
The pneumatic part conveyor of STRACK NORMA offers the optimal solution
Space is rare and precious – in particular under a punching tool. The punching waste must be removed as quickly as possible in confined space, but what is the best solution?
Please read more ► PDF-Press release 06/16
Accident insurance for the designer
New BAK adapter ensures more security and low costs
Time is money – and this applies above all for the design of tools. Here the designers like to use the standard part libraries of the individual manufacturers to make construction drawings fast and efficiently.
Please read more ► PDF-Press release 02/16
Smallest standard cam with maximum power
The new PowerMax® 2.0 from the company STRACK NORMA
The change in the toolmaking is characterized by pressure on costs, savings and innovations for the steady improvement of an efficient production process. Narrow space conditions and fewer and fewer tool stages are the requirements for the designers of today. In future, tools must become even more compact and smaller to meet the requirements of a small installation space.
In this context savings in time and in resulting costs play an important role. Meanwhile more and more working steps are made in one stroke, to be able to save one, respectively more stages. Here no losses with respect to running properties and press force should be made.
The standard part specialist STRACK NORMA from Lüdenscheid has heard the call of the designers and faced this challenge.
The result is the cam of the latest generation: The new PowerMax® 2.0.
Please read more ► PDF-Press release 10/15
► PDF-Brochure PowerMax® 2.0 Compact aereal standard cam
► PDF-Normalienreport "The new PowerMax® 2.0 as a problem solver"
Further improve what’s already good!
All latch locks with DLC-coated components
All latch locks of the standard part specialist STRACK NORMA will be provided with a DLC-coating at sliding components to meet highest requirements in the injection moulding technology. Herewith the proven latch locks are able to ensure even higher running performances and to ensure a trouble-free manufacturing process.
The DLC-layer (Diamond-Like-Carbon) is a diamond-like-carbon layer. It is applied on moving components, which are for example running unlubricated or to extend the maintenance intervals. DLC is the successor of WCC-coatings, because the coating is harder and thus more durable.
In addition DLC-coating characterizes by low friction coefficients and good wear properties.
By using DCL-coated components and the resulting freedom from maintenance an up to 80 % reduction of the maintenance costs can be achieved.
At first view, the new DLC-coating cannot be seen, because the pawls as well as the locks are coated with the layer. Thus a maximum benefit is achieved and friction and wear are minimized.
small becomes LARGE
The new latch lock Z4-40 for heavy weights
- For the large-scale mould making
- Static load capacity up to 80 kN
- Low-maintenance due to DLC-coating
- Also available as two-stage ejector
Z4279
Mini-Slide unit
Small but powerful – Demoulding of undercuts at tools with limited installation space
- Compact design
- Absolute dimensions of 25 x 11 x 10 mm (bolt = 190 mm – individually shortened)
- No screw connections are necessary
Z49
Centring unit
A round thing – Centers precisely and inexpensively. The new flat centring unit with cylindrical outer contour.
- Variety of positioning options in the tool
- Inexpensively machnining of the mold plates
- Increased part quality because of high-precision guidance
SN1598
Ring bolts, rotatable
Comfortable from A to B
- By 360° freely rotatable
- Increased load capacity on straight pull
- Tool-free assembly and disassembly
Z7690
Limit switch
- Sturdy aluminium housing with integral micro-limit switch
- Thermal endurance up to 120 °C
Z7691
Limit switch
- Sturdy aluminium housing with integral micro-limit switch
- Thermal endurance up to 240 °C
Z5263
Counter, mechanical
New Counter – now in standardized installation dimensions
- Counts the impulse of production means reliably
- Suitable for all devices having to count an opening- and closing impulse
- For a quick and flexible control directly on the tool
Z7757
Testing pump for pressure, 50 bar
Precision testing pump for exact and fast pressure or leak test of injection moulds and mould inserts
Z5460
Tempering control filter
New tempering control filter ensures a smooth production process
- Clean tempering medium with minimum energy consumption
- Filter for small cooling holes or core coolings
- Removes dirt particles from the cooling circuit
Stäubli and STRACK cooperate
Since April STRACK has been direct sales partner of Stäubli Tec-Systems GmbH from Bayreuth. The well-known company is one of the leading manufacturers of quick coupling systems for liquids, gases and electrical energy in the world.
STRACK will distribute the Mono-, Multi- and Quick coupling systems together with further items from the wide product range for the stamping and forming technology and for injection
moulding and die casting tools.
Due to the unique competence in the coupling technology, Stäubli can offer a qualified and fast service in collaboration with STRACK. The service doesn’t only focuses on the groundbreaking connection technology but also on the complete product range. Other sectors of Stäubli GmbH are the production of textile machinery and robotics (SCARA- and articulated-arm industrial robots).
Z3850
Flat guide strips
We welcome the new family member Z3850 warmly in the range of the guiding elements.
The new series of guide brackets can be used in the punching- and forming sector and in CFK-tools. It provides for the centering of the upper- and lower tool part as well as for the centering of the single mould halves.
Here instead of the proven graphite plugs, the sliding surface is at three sides made out of sintered metal to obtain improved sliding properties and a greater sliding surface.
Z4252
Guide strips
A further member in the family of the guiding elements is the guide strip Z4252. This strip is used as hardened counterpart to the guide bracket Z3850 and has to be adapted to the optimal guide clearance. The DCL-coated sliding surface results in an improved sliding property.
FCS Clamping system
The advantages of the FCS clamping system particularly are that, similar to a zero point clamping system, a high flow in production can be achieved.
The system is structured as a modular system and consists of a base plate with a 50 grid as well as positioning rings, bolts and columns designed for superstructures of the work piece.
Thereby the work pieces can be machined freely from all sides in one clamping position.
There is no restriction because of clamps and auxiliary construction.
Make yourself free of any constraints, reduce your set-up time considerably and use the system for a future-proof efficient production.
► PDF-Clamping systems Brochure
Limit switches show the way
New versions in a new design
- Connection diagram can directly be read on the product
- Housing made of aluminium
- Resistant to temperatures of 70 C° to 240 °C
- High-quality micro switch
- For each query a secure solution
- Extensive accessory program
Expansion of our range of gas springs
Serie SN2820-P:
Powered Gas springs (ISO 11901-1/VDI 3003)
NEW: SN2820-P-300, -500, -1000, -2400, -4200, -6600
Serie SN2820-C:
Gas springs with connections of several pages (ISO 11901-1/VDI 3003)
NEW: SN2820-C-750, -1500, -3000, -5000, -7500, -10000
Z7755
Mould insert leak pressure test unit
- Test set for temperature control Systems
- 3 execution sizes, universally applicable from M5 to M12
- Flexible fixing, easy handling
- Connections Z7713, type 2 + 3
► PDF-Z7755
Z9084
Synthetic special lubricant for SNS guide elements
Operative ranges:
- Infiltration of sintered bearings
- Infiltration of low friction bearings
- Manual or automatic lubricant supply
- Circulating lubrication
- Pressure lubrication
SN1782
Re-circulating ball bushes
- Long life
- Precise guidance without stroke limitation
- Ideal for guiding the ejector plate packet and for using in fixture manufacturing
- For fixing with snap rings (without collar)
- NEW with collar for the specific unse in the ejector plate packet
- Temperature resistance up to 200 °C
SN4520
Guide
Position adapter SN4520 provides for a precise position.
The position adapters which are required againand again provide for the pre-positioning of the sheet metal plates which are inserted in the tool by transport grippers.
The company STRACK NORMA here responds to customerwishes and accommodates these position adapters in the wide range of the STRACK product Family.
► PDF-SN4520
SN1596
Safety ring bolts
- Easy to assemble / dismantle thanks to forged hexagon on the body of the swivel
- Crimped marks prevent the link from kinking
- Corrosion protection trough galvanising, including the internal areas
► PDF-SN1596
SN5655-PMO-SRA
Safety ring bolt adapter
The safety ring bolt adapter facilitates the handling in many installation situations at the standard cams of the width 90, 125, 165 and completes the existing handling screw thread.
► PDF-SN5655-PMO-SRA
Z69
Angle pins
Mould-ready angle pins for highest demands on the precision in the moldmaking
Z51-...
Centring elements (Replacement for centring elements Z50-...)
Advantage:
The upper part of the centering unit is now coated with DLC. The DLC coat (Diamond Like Carbon) is a carbon layer similar to a diamond and is applied to the movable components, which for example run unlubriated or to extend the maintenance intervals.
DLC is the successor of WCC-coatings, because it is harder and thus has a longer life. Moreover the DLC layers characterize by low friction coefficients and good wear properties.
Z7520
Compact controller for all 230 V h - Microprocessor-based PID controller with autotuning
SNS sintered metal sliding elements
To accommodate the high requirements at modern tools with regard to the strain by the machining of high strength sheets with an, at the same time, increasing of the running life and maintainability, a new sintered bronze material has been developed.
The new generation of sliding elements is steel reinforced, iron based, porous sintered metal.
It features itself by its high wear resistance at medium, till high speeds.
The sintered metal is placed on a steel base body, which gives the sliding element a higher solidity.